Close
Q:

MY AUDI A4 GO'S INTO GEARS ON DISPLAY BUT WONT MOVE ENGINE JUST REV.S on 2000 Audi A4 Quattro

Rookie cbe0621eac06868b3efe0d8d1d3611e23c60d3114864ea2ec19a68cfbd3eebab
MY AUDI A4 GO'S INTO GEARS ON DISPLAY BUT WONT MOVE ENGINE JUST REV.S I CHECKED THE FLUID HAS AROUND 2LITERS ,WHEN I LIFT THE CAR I CAN SPIN THE WHEELS FREELY THEY DONT LOCK LIKE THEY DID BEFOR THIS HAPPENED ?
(1) Answer
(1) Comments
You may need to have the transmission inspected, it sounds like it is having problems. If the display is showing gear changes, that usually means that the gear selector switch is being moved by the cable. I would have someone move the lever and then you can look in to the engine compartment and see if the selector lever is moving on the transmission. But to be safe, do it with the key on and the engine OFF.

here are some shops to help you:

https://repairpal.com/directory?address=93257&car_brand_names=Audi
THE KNOB MOVES THE TRANSMISSION INTO GEAR YOU CAN HEAR IT SLIDE BACK AND FORTH CHECK SOLENOIDS THEY WORK GREAT I WAS TOLD IT CAN BE THE TCM?DO TO AFTER I PUT INTO GEAR ON THE DISPLY THE PRND432 GET HIGHLIGHTED IN RED ?