1990 Mitsubishi Mighty Max Questions

Answered 1990 Mitsubishi Mighty Max Questions

Ask a Question
View:RecentAnsweredUnanswered
We are told there is one person in America that makes new ones... The repair cost with parts is $2000.00 I see gasket job is $600-900, so a new head costs $1200????
why is the motor running rough and take air sensorout and it runs better
how to correct black smoke coming from exahust system
When I turn the key to the on position to start the engine if the service engine light does not go out the engine will not fire. I have to let it sit with the ignition switch in the run position and eventually the ser...
Have lack of clutch pressure if I torque pressure plate bolts to specified torque of 12-14 ft/lbs. Specifically, there's too much distance between release bearing and pressure plate. Pressure plate fingers are nearly ...
i was driving home and the clutch went to the floor so i started working on it i have replaced the clutch the cable the throw out bearing and had the tranny looked at by a mechanic it is a cable oporated clutch and i ...
i need the timing marks for 1990 mitsubishi mighty max 2.4l or a web site or something to get them from. thank you
i replaced my cluch in my 87 mighty max because it went out i thought. i still have no cluch it just goes to the floor when i push the cluch in but the cluch cable is not frayed or broken looks ok. and i was told it w...
my uncle gave me a 1990 might max v-6 4wd. I can not get fuel pump to run. It has been sitting for 2yrs. I pulled spark plug wire off and I have spark. I have unhooked the fuel line from filter but I get no gas out of...
1990 Mitsubishi Mighty max 4 cyl, What would be the first sensor to check? Already replaced water temp sensor. Same amount of black smoke from cold to running temp. Thanks..B
I HAVE AN 1987 MITSUBISHI MIGHTY MAX 4 CY PU I NEED TO REPLACE THE IGNITION SWITCH AND KEY. HOW DO I GET THE OLD SWITCH OUT?
Spark plug gap for 1990 Mitsubishi Mighty Max 4 cylinder
After sitting for several months vehiclce does not seem to get gasoline. There is fuel in the tank but the fuel gage does not resister when the ignition key is on. Is this a fuel pump or electrical problem? how can I ...