» » »

Problems for specific Mitsubishi Galant years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Repairpal verified 2002 Mitsubishi Galant problems

 

Verified for the Mitsubishi Galant

There have been reports of airbags not deploying in the event of a frontal impact. Some claim that a shorted airbag wire harness can cause this to occur. Unfortunately there is no diagnoses that will isolate this problem other than fault codes stored in the airbag control module. Our technicians recommend to have any airbag light issues diagnosed and repaired in order to help ensure the airbags will deploy when needed.

13 Reports
Me Too

Verified for the Mitsubishi Galant

The Check Engine Light may illuminate due to one or more engine vacuum leaks. Our technicians tell us these leaks can be caused by damage to seals and/or vacuum hoses as a result of to much ethanol content in the gasoline. Affected hoses and seals must be replaced to correct this concern.

14 Reports
Me Too

Verified for the Mitsubishi Galant

A brake pedal pulsation may be noted on brake apply. This is commonly caused by warping of the front brake rotors. Our technicians remind us that re-machining (turning) the rotors can correct this issue but the repair may last only a short time as the thinner rotors would be even more prone to warping. Replacement of faulty rotors with high quality parts is often the best option in these situations.

8 Reports
Me Too

Verified for the Mitsubishi Galant

The crankshaft position sensor may fail causing a no start and/or stalling condition. Replacement of the failed sensor will generally corrects this concern.

15 Reports
Me Too

Verified for the Mitsubishi Galant

The automatic transmission may develop a 2-3 shift flair. This is commonly caused by an internal fault related to the reverse clutch assembly. Replacement of the rear housing and reverse clutch assembly may be required to correct this concern.

17 Reports
Me Too

Verified for the Mitsubishi Galant

The water shut motor may fail. This motor controls coolant flow to the heater core. Replacement of the failed part will be necessary to correct this issue.

4 Reports
Me Too
Ask a Question