Mercury Recalls

Summary:
THESE VEHICLES WERE BUILT WITH THE NON-CYCLING POWER WINDOW CIRCUIT BREAKER AND THE CYCLING HEADLAMP CIRCUIT BREAKER INTERCHANGED.
Summary:
THE SEAL MATERIAL BETWEEN THE FUEL FILLER PIPE AND FUEL TANK MAY NOT HAVE BEEN FULLY CURED DURING THE MOLDING PROCESS WHICH COULD ALLOW FOR FUEL LEAKAGE.
Summary:
THE GLASS TEMPERING PROCESS ON THE RIGHT HAND REAR DOOR WINDOWS WAS NOT CORRECTLY PERFORMED. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 205, "GLAZING MATERIALS."
Summary:
THE PASSENGER SIDE AIR BAG HAS AN INFLATOR BODY THAT CRACKED DURING FORMING OF THE CURL THAT RETAINS THE IGNITER PLUG IN THE END OF THE INFLATOR. ALSO THE IGNITER END CAP CAN SEPARATE FROM THE INFLATOR.
Summary:
THE DRIVER SIDE AIR BAG MODULE CAN HAVE AN INADEQUATELY WELDED INFLATOR CANISTER.
RepairPal Expert Overview:

Ford has recalled certain 1995 Taurus and Mercury Sable vehicles for an issue with a missing or misplaced clip that secures the brake pedal arm to the master cylinder push rod. If this clip is missing or damaged, the push rod could separate from the pedal arm, causing a lack of braking power. Dealers will inspect and install a retainer clip if necessary.

RepairPal Expert Overview:

Monroe has recalled certain 1990-1994 Taurus and Mercury Sable vehicles with Monroe aftermarket struts installed for a concern with the weld mounting on the sway bar bracket where it attaches to the strut tube. On some vehicles, this weld did not fuse properly, which can cause the sway bar to drop and possibly contact the tire, damaging it. Monroe dealers will replace the affected struts.

Summary:
A METAL SHIELD ON THE OUTSIDE OF THE PLASTIC FUEL FILLER PIPE CAN DEVELOP A STATIC ELECTRICAL CHARGE DURING REFUELING OF THE VEHICLE.
Summary:
THE FUEL TANK FILLER PIPE OPENING REINFORCEMENT CAN LEAK AT THE WELD.
Summary:
THE WINDSHIELDS WERE MARKED WITH A "PROTOTYPE" DESIGNATION AND NOT MARKED AS REQUIRED BY FMVSS NO. 205, "GLAZING MATERIALS."

Related Content