Problem Reports
Problem with your car? See what our experts say or submit your own.
2006 Mercedes-Benz SLK280 Problems
Stalling and/or "Crank no Start" Due to Failed Crankshaft Position Sensor
The engine may develop a stalling and/or no start condition due to a failed crankshaft position sensor.
Check Engine Light Due to Faulty Camshaft Adjuster Solenoid
The camshaft adjuster solenoid (which is related to the variable valve timing system) may fail or timing chain/balance shaft components may wear, resulting in illumination of the Check Engine Light and various drivability issues. Mercedes-Benz has released a service bulletin outlining specific repair instructions depending on fault codes stored.
Brake Pads & Rotors May Wear After 20,000 Miles
As a way to increase braking performance, the brake pads and rotors are make of a softer material and may be in need of replacement after approximately 20,000 miles; owners should be vigilant about getting their brakes checked.
ABS Modulator Failure Due to Dirty Brake Fluid
It is not uncommon to encounter premature failure of the anti-lock brake system (ABS) modulator assembly due to dirty brake fluid. Our technicians recommend flushing the brake fluid every two years in order to help prevent this problem.
Rough Shifting of Automatic Transmission
Vehicles equipped with a 7-speed automatic transmission may develop a rough shifting condition, most commonly going up from first to second gear and going down from third to second or second to first gear. Our technicians tell us this is due to an internal component failure. Mercedes has released updated parts; the transmission will need to be removed and disassembled to complete the necessary repairs.
The Differential May Develop Leaks From the Seals or Cover
High mileage or older vehicles commonly develop leaks from the differential seals and/or cover. Our technicians recommend a complete reseal of the differential unit whenever these leaks are repaired.
Cracked Driveshaft Flex Discs May Cause Driveshaft Movement/Vibration
A vibration felt through the center floor of the vehicle can be caused by driveshaft flex discs, which crack and shred, causing excessive driveshaft movement. Not repairing these can cause damage to the driveshaft center support bearing, or, in the worst case scenario, damage to the transmission or differential.
-
Verified
Quality Work -
Guaranteed
Fair Prices -
Happy
Customers