1997 Mercedes-Benz E320 Problems
RepairPal has identified the most common problems with the 1997 Mercedes-Benz E320 as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
Due to wear, high usage vehicles can experience ignition lock and tumbler failures. The ignition lock cylinder will generally require replacement to correct this concern.
The cup holder in the center console may break.
Brake lamp housings can melt, resulting in a loss of contact for the brake light bulb holder. If this happens, the brake light will not work. Replacement of the damaged lamp housing should correct this problem.
The crankshaft position sensor may fail. Symptoms of this are: The engine will crank—but not start—especially when the engine is warm. The car may start again if it is left to cool off, but it may run roughly or have poor performance.
A coolant leak may develop form the Radiator due to degradation of its plastic components. Replacement of the failed radiator will be necessary.
The ESP and BAS warning lights may illuminate due to a failed brake light switch. Replacement of the failed switch should correct this concern.
PSE system, voice control module, or Tele Aid module failure can cause a lack of audio. These same modules can also cause dead battery conditions when they fail to "time out." Many electronic control modules are active even when the engine is off. If these modules stay active, they will drain the battery, which is why they have a timer built into the modules. The timer shuts down the modules after a preset amount of time (timing out). If a module does not time out, it will stay active and drain the battery.
A squeak from the steering column is often related to a rubber boot in the column or a seal in the power steering rack.
When the engine is running, but the vehicle is not moving, a rattle heard from beneath the vehicle could indicate that one of the exhaust catalytic converters has failed. The substrate (the internal part of the catalyst that reduces emissions) can loosen and bounce around inside the canister section of the converter—the defective unit will need to be replaced. If this problem is ignored, the substrate can break down and reduce to a size that plugs the outlet pipe, which will cause a sudden loss in power.
Instrument cluster displays tend to fail, especially the clock and gear indicators. Our technicians tell us the instrument cluster will require replacement to correct this issue.
High mileage vehicles may develop a leak from one or more of the transmission oil seals.