» » »

Problems for specific Mercedes-Benz 300D years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Repairpal verified 1993 Mercedes-Benz 300D problems

 

Verified for the Mercedes-Benz 300D

The lower control arm bushings can wear and crack, leading to irregular and premature tire wear. Worn Ball joints can also cause similar tire wear problems. I some cases it may be necessary to replace the lower control arm, including bushings & ball joint to correct this concern.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

The lenses for head lights may become opaque (cloudy or hazy) as a result of sun exposure. This can reduce the effectiveness of the lights. Our technicians tell us plastic polishes can improve the clarity of the lenses, but replacement of the lamp housings is necessary to regain full intensity of the lights.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

Due to wear of the internal drive gear, the speedometer can stop working.

5 Reports
Me Too

Verified for the Mercedes-Benz 300D

Vehicles with automatic level control that ride harshly in the rear (no give in the suspension) may have one or both dampening actuators which have failed. It is commonly recommended the actuators be replaced in pairs.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

Due to age and sun exposure, the interior wood trim cracks and the finish gets a cloudy haze. Replacement if the trim would be the most common solution to the problem.

5 Reports
Me Too

Verified for the Mercedes-Benz 300D

The sunroof may not work correctly due to failed components as a result of age and wear. Repairing a sunroof can be labor intensive and very costly.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

High mileage vehicles may develop a transmission fluid leak from one or more of the oil seals.

 

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

A worn steering dampening shock can cause a fluid leak at the front of the vehicle. If a leak is noted from the dampening shock, our technicians tell us that it should be replaced.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

As brake fluid becomes dirty over time, it can cause a failure of the anti-lock brake system (ABS) modulator assembly. Our technicians recommend a complete brake system flush every two years to help prevent this issue.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

The tie rod ends, idler arm, and/or drag link components of the steering linkage may wear prematurely. Please keep in mind the wheel alignment should be checked and adjusted when any of these items are replaced.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

One or more blend door vacuum actuators may fail resulting in the incorrect output temperature from the HVAC system. Failed actuators will require replacement to restore proper HVAC operation.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

The brakes may begin to squeak at about the 50 percent wear point. This is due to the size and material used for the brake pads and rotors.  The brake rotor surfaces become uneven, causing a lip to form at the outer edge. This will generally require replacement of the rotors when the pads are worn (pad life varies depending on driving style and terrain).

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

Leaks may develop from the differential seals and/or cover on older or high mileage vehicles. Our technicians recommend a complete reseal of the differential unit when these leaks are addressed.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

The engine wiring can degrade because the insulating material falls off leaving the bare wire exposed. This can cause many problems depending on which wires are exposed and what they touch.

4 Reports
Me Too

Verified for the Mercedes-Benz 300D

Due to wear, high usage vehicles can experience ignition lock and tumbler failures. The ignition lock cylinder will generally require replacement to correct this concern.

4 Reports
Me Too
Ask a Question