Problem Reports
Problem with your car? See what our experts say or submit your own.
1995 Mazda MX-6 Problems
Engine Misfire Under Load
Vehicles with a V6 engine may develop an engine misfire under load (acceleration). This can be caused by a valve cover gasket leaking oil into a spark plug well, shorting the spark plug to the cylinder head. To repair this concern, the valve cover needs to be resealed and the spark plugs and wires should be replaced.
Crank but No Start Condition and No Fuel Pressure
If the engine cranks but does not start, it may be caused by a tripped inertia switch. Switch the key to "ON" and the fuel pump should be heard running for a second or two. Listen at the gas filler if necessary. If you do not hear the pump the inertia switch should be reset, it will "click" when it is reset.
Crank but No Start Condition and No Spark
If the engine cranks but will not start, it may be due a failed distributor. In the diagnosis, it may be discovered that the Electronic Engine Control (EEC) Unit is the cause if ignition spark is restored after disconnecting the Spark Output (SPOUT) Connector.
Misfires Under Load
Misfires under load (acceleration) can be caused by leaky spark plug boots. When a spark plug boot leaks, it allows the spark to arc, or jump, to the cylinder head. New spark plug wires will be needed.
Knocking from suspension on rough roads due to worn or loose sway bar links
-
Verified
Quality Work -
Guaranteed
Fair Prices -
Happy
Customers