1994 Mazda B2300 Questions
Answered 1994 Mazda B2300 Questions
Ask a Question
when i pulled off the pully on the crankshaft the pully puller i used stripped the treads where the center bolt went
Is there a secondary selonoid on a b2300? could it be a bad relay? It sounds like clicking noise is coming from the thing attached to the drivers side fire wall with 3 wires hooked to it. not sure what this is relay...
Truck sat without being cranked for a year. Everybody says fuel pump. I changed the inline fuel filter, no help.
Installed a new oil pump still have no oil pressure the bearing are good and so is the shaft that come down to the oil pump... need to know what drives that shaft
1994 b2300 75000 miles
I've changed fuel pump and fuel pump relay, still doesn't start sometimes! And like now, it won't start at all! I was told that the computer was the only other alternative! You can hear the pump come on and it always ...
Installed new fuel pump,fuel filter,new injectors,2 new coil packs,clean out gas tank. Loud chatter noise from drivers side front of engine.Sounds like cranky injectors.Change injectors out again 1 by 1 but no fix.The...
And I now it is firing on all cylinders
It is Either one or the other
I have a 1994 Ford Ranger-I blew up the muffler-put in new Catalytic converter and Heartthrob exhaust; I have fuel pressure at filter and fuel rail: I have fire at ignition packs; the truck will crank, but not start; ...
took it to an auto shop, the mechanic says the diagnostic codes does not give answers to the problem. he thinks it could be the timing.
Clean:oil,air fltr,maf,Cant find PCV. Does the 2.3L have a PCV?