Misfires under load (acceleration) can be caused by leaky spark plug boots. When a spark plug boot leaks, it allows the spark to arc, or jump, to the cylinder head. If evidence of arcing can be seen on the inside of the spark plug boot, new spark plug wires will be needed.
Problems for specific Mazda 626 years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2001 Mazda 626 problems
Vehicles with a V6 engine may develop an engine misfire under load (acceleration). This can be caused by a valve cover gasket leaking oil into a spark plug well, shorting the spark plug to the cylinder head. To repair this concern, the valve cover needs to be resealed and the spark plugs and wires should be replaced.
If the engine cranks but does not start, it may be caused by a tripped inertia switch. Switch the key to "ON" and the fuel pump should be heard running for a second or two. Listen at the gas filler if necessary. If you do not hear the pump the inertia switch should be reset, it will "click" when it is reset.
The intake manifold gasket can fail causing vacuum a leak and/or a rough idle condition. Replacement of the leaking gasket will be necessary to correct this concern.
Premature automatic transmission failure is common. Diagnoses of the fault will be necessary to determine if repair or replacement is the proper repair.