1999 Mazda 626 Questions

Answered 1999 Mazda 626 Questions

Ask a Question
View:RecentAnsweredUnanswered
my check engine came on i took it to advance auto they told me to replace the egr valve so i did check engine light came on again they told me to replace the egr vacuum solenoid but we were unable to locate it on the ...
Engine light is on and has a - PO400 'A' Flow - code. Already changed EGR valve, solenoids and hose within the last month. Many times when pushing on the gas the car remains in a slow pace then slowly picks up in spee...
When using car it uses break fluid half of the master cylinder please help
Whenever I'm in hill my car shakes and pops out of drive and reverses back and I have to push down on the gas so I won't hit and other cars and the same thing happens when I'm on a flat surface and it sometimes turns ...
So I just rebuilt my motor. New rings/valve oil seals. 3 cylinders run 1,2,4. 3 cylinders don't run 3,5,6. I have confirmed compression at 140psi on all cylinders. Confirmed spark on all cylinders. Timing is correct. ...
So I'm having no spark. Changed coil pack and spark plug wires as well as crank sensor. I am getting fuel and compression as well as a fully charges battery. Also am getting 12 volts to the coil power wire connecter. ...
So I put the head gaskets on the opposite heads. I got 30 psi compression, a no start, and some coolant and alot of gas in the oil pan. Would flipping the head gaskets to the correct heads fix these issues? Or does it...
My car cranks up but doesn't start. I have confirmed perfect timing. Redid that twice. Confirmed spark. New coil and wires. Confirmed gas. When I pulled the tube between the fuel rails gas squirted heavily when cranke...
also it will just shut off as im driving it and takes about 15 minutes before i can restart it again.
The engine is just rolling,no shock,no transmmision
I replaced thermostat radiator cap, hoses and just noticed that the fans behind radiator not turning. No sure which fuses to check next, or what could it be????
only for a short time when turned on after sitting for a period of time, or overnight. The belts Look Good, mechanic advised they did not need replacement yet???