Due to the use of an incorrect primer, the adhesive securing the panoramic roof assembly may fail, causing the roof to detach from the vehicle. Dealers will apply the correct primer free of charge to resolve the concern.
Land Rover Recalls
The vehicle doors may unlatch unexpectedly when closed. Dealers will update the keyless entry software free of charge tor resolve the concern.
The occupant classification system that detects whether a passenger is in the passenger front seat of the vehicle may malfunction, resulting in the disabling of the passenger frontal air bag during a crash. Dealers will update the system software free of charge to resolve the concern.
The engine may seize and fail internally due to the connecting rod bolts being torqued improperly. Dealers will replace the affected engines free of charge to resolve the concern.
These vehicles are being recalled because their front brake lines (hoses) may rupture causing loss of brake fluid and braking control. Loss of front braking in a vehicle reduces the ability to stop suddenly, increasing the risk of a crash. Dealers will inspect the front brake lines and replace both as necessary.
The occupant classification system may fail, causing unintended deactivation of the passenger air bag. Dealers will update the restraint control module (RCM) software free of charge to resolve the concern.
An electrical connector for the driver and/or passenger side seat airbag may become disconnected due to insufficient clearance for the wire harness within the seat. If this were to occur the affected side airbag would not function as expected in the event of a crash, increasing the risk of personal injury. Dealers will modify the area around the problem connector to prevent it from becoming accidentally disconnected.
The brake calipers hold the brake pads in place and use hydraulic pressure to press the pads against the rotors when the brakes are applied. The bolts that hold the rear calipers in place may not have been sufficiently tightened during vehicle assembly. If the mounting bolts were to come loose, the caliper could detach from the vehicle resulting in loss of braking ability. The loose caliper could also strike the wheel, causing sudden deflation of a tire. Either of these situations may increase the risk of a crash. Land Rover dealers will inspect and tighten the rear brake caliper mounting bolts to correct this concern.
Thirty-six vehicles are being recalled because during the manufacturing process, the windshield on these vehicles may have been installed incorrectly. In the event of a crash, the windshield may come loose from the vehicle, increasing the risk of injury to the vehicle's occupants. Dealers will replace the windshield on these vehicles to correct this concern. The Land Rover recall number is P028.
Vehicles that had drive shaft couplers replaced may have had defective parts installed, which can result in drive shaft vibration and separation. Dealers will replace the affected rear drive shaft couplers free of charge to resolve the concern.