2007 Jeep Liberty Problem Reports

Newest 2007 Jeep Liberty Problem Reports

Report A Problem

An engine misfire at idle (rough idle), accompanied by illumination or flashing of the Check Engine Light, could indicate a problem with one or more of the intake valves. Revised intake valves & valve locks are available to address this concern.

If the power door locks are buzzing or are intermittently noisy, a new door latch assembly may solve this. The door lock actuators are integrated into the latch assemblies.

Leaks at the front and/or rear differential pinion seal and from the transfer case are common. Low fluid level in the differential or transfer case can result in bearing failure. Damaged bearings commonly cause a whine or growl type noise.

Broken exhaust manifold bolts can create an exhaust leak; the exhaust manifold gaskets and bolts should be replaced.

The power window motor commonly fails in the front and rear doors. This may require replacement of the complete window regulator assembly which will include the window motor.

There are a number of checks to perform if the windows do not move smoothly through their travel. It may be interference between parts, the window regulator, or the window run channel.

The 3.7L V6 and 4.7L V8 in very cold climates (below freezing temperatures) moisture can collect in the Positive Crankcase Ventilation (PCV) system and freeze. This will cause various drivability problems and there are revised PCV system components to repair this concern.

The Body Control Module (BCM) may need replacement if the instrument panel warning lamps periodically flicker.