Problem Reports
Problem with your car? See what our experts say or submit your own.
2009 Jeep Commander Problems
Spark Knock, Noise/Vibration/Harshness, and/or Check Engine Light Issues
Spark knock, noise/vibration/harshness, and/or Check Engine Light issues may develop. Our technicians tell us powertrain control module (PCM) software upgrades may correct these concerns.
Warm Air From the Instrument Panel Outlets When Cold Has Been Selected
Vehicles with manual temperature control may develop a condition where warm air is coming from the instrument panel outlets when cold has been selected. Our technicians tell us a revised air distribution housing is available to correct this concern.
Check Engine Light Code P2181 For a Cooling System Performance Fault
On Vehicles with a 4.7L or 5.7L V8 engine, the Check Engine Light may illuminate with code P2181 for a cooling system performance fault. Or technicians tell us that updated software for the powertrain control module (PCM) is available to correct this concern.
The Check Engine Light With Code P013A and/or P013C
On Vehicles with a 3.7L V6 or 4.7L V8 engine, the Check Engine Light may illuminate with code P013A and/or P013C. Or technicians tell us that updated software for the powertrain control module (PCM) is available to correct this concern.
The Fuel Tank is Hard to Fill and/or the Fuel Fill Nozzle Shuts Off Repeatedly While Fueling
The fuel tank may become hard to fill and/or the fuel fill nozzle may shut off repeatedly while fueling. Our technicians tell us that various items including the fuel tank, vapor recirculation tube, fuel fill tube, or EVAP system canister control valve may be at fault. Proper diagnoses will be required to determine the exact cause of this concern.
Popping or Groan Noise When Opening or Closing One or More of the Vehicle Doors
A popping or groan type noise may occur when opening or closing one or more of the vehicle doors. This may be caused bu insufficient lube on the lower hinge roller axle. Applying a small amount of grease between the roller pin and the inside surface should correct this concern. Our technicians tell us if the grease is not applied in the correct location, the noise will remain.
-
Verified
Quality Work -
Guaranteed
Fair Prices -
Happy
Customers