1990 Jeep Cherokee Questions
Answered 1990 Jeep Cherokee Questions
Ask a Question
My jeep is a 86 2.5 it will start sometimes. When it does start it will go 5-10 mph for a short distance and then stall out and not start back up for awhile. also stalls out when at lights and etc. i know it needs a new manifold but what else???? help
I have a new fuel pump and battery so thats not the issue.
Replaced because of squealing by a friend. But they still squeak.
Failed the HC GPM. 3.7797 Limit 3.0000 Failed CO GPM 57.8648 Limit 25.0000 Before test I had spark plugs, spark plug wires, cap and rotor, new air filter, changed oil, and new oil filter.
My jeep is actually a 1987,I removed all the oil pan bolts but i cant get the pan free ,i tried to pry on one corner but it wont budge does anyone have an idea, it must have permatex on it.
It will turn over like it wants to start, but will not start.
does the rubber nipple need to be on the end of the rod
Vehical starts and then dies right away, doe not matter it you put your foot an the gas or not. Im sure it is the fuel pump but one guy at the parts store says its a mechanical pump and another says its in the gas tank.
put a new brake booster on and plug brake light swicth up and it worked but wood not go off so unplug them and now they want come on
i am planning on repairing my head gasket myself.(or at least do whatever parts i can.) is there anywhere i can get a complete breakdown of how this is done, what is involved. preferrably a step by step walkthru. ...
my straight 6 engine is seeping oil out the passenger side along the seam where the head meets the block. about a quart every wk and a half. otheer then that it runs fine. what can i do on my own? by a shop? estim...
90 CHEROKEE 86000 MI. ONCE AND A WHILE MY CLUTCH PEDAL GOES FLAT WHEN I GO TO SHIFT AND THEN RECOVERS WHEN I PUMP IT...NOT LOW ON FLUID.....??????
i have a 89' laredo none of the guages work such as rpm, oil press, temp, volts only guage that works is speedodmeter took out guage panel no broken wires or nothing checked blade fuses. Any help would be appreci...