X

Isuzu Recalls

Models : Honda Passport, Isuzu Amigo, Isuzu Rodeo
Suspension & Steering, March 31, 2000
Summary:VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. PAINT WAS APPLIED UNEVENLY ON THE REAR AXLES, RESULTING IN INSUFFICIENT PAINT HARDNESS. SHOULD THIS OCCUR ON THE SURFACE THAT CONTACTS THE REAR AXLE LOWER LINK BRACKET BOLT HEAD AND/OR NUT, THE NUT MAY LOOSEN.
Models : Isuzu Oasis
Suspension & Steering, June 21, 1999
Summary:VEHICLE DESCRIPTION: PASSENGER VEHICLES. CERTAIN VEHICLES WERE MANUFACTURED WITH BALL JOINTS THAT CAN PREMATURELY WEAR OUT AND, IN THE WORSE CASE, THE BALL JOINT WOULD SEPARATE CAUSING THE FRONT SUSPENSION TO COLLAPSE.
Models : Acura CL, Acura RL, Acura TL, Honda Accord, Honda Odyssey, Honda Prelude, Isuzu Oasis
Suspension & Steering, May 17, 1999
RepairPal Expert Overview:

The ball joints in the front suspension may prematurely wear out. The ball joints could break in severe circumstances, which may cause an accident. Dealers will replace the front suspension lower ball joints. This recall is expected to begin by May 17, 1999.

Models : Isuzu Hombre
Body, Interior & Misc., December 15, 1998
Summary:VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES, 2 AND 4-WHEEL DRIVE. SOLDER JOINTS NEAR THE WIRING HARNESS CONNECTOR CAN CRACK CAUSING THE WINDSHIELD WIPERS TO WORK INTERMITTENTLY.
Models : Isuzu Amigo
Body, Interior & Misc., December 9, 1998
Summary:VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A SUNROOF SUNSHADE. THE PRIMER APPLIED TO PREPARE THE SURFACE PRIOR TO BONDING THE SUNSHADE HOLDERS TO THE SUNROOF WEAKENED THE BONDING STRENGTH OF THE ADHESIVE, RESULTING IN AN UNSATISFACTORY BOND OF THE HOLDER TO THE SUNROOF.
Models : Acura SLX, Isuzu Trooper
Drive Train, August 24, 1998
Summary:VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE TRANSFER GEARBOX FLANGE NUTS WERE NOT PROPERLY INSTALLED, CAUSING THE NUTS TO LOOSEN.
Models : Honda Passport, Isuzu Amigo, Isuzu Rodeo
Electrical & Lights, August 24, 1998
Summary:VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. A GROUND CONNECTION TERMINAL WAS NOT PROPERLY CRIMPED IN THE SUPPLIER'S ENGINE WIRING HARNESS MANUFACTURING LINE. THIS IMPROPER CRIMPING PROCESS CAN LEAVE AN IMPRESSION ON THE TERMINAL THAT WILL EVENTUALLY CAUSE A STRESS FRACTURE. S
Models : Isuzu Amigo
Body, Interior & Misc., June 15, 1998
Summary:VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE STRENGTH OF THE REAR SEAT BELT SHOULDER ANCHORAGE IS NOT TO DESIGN SPECIFICATIONS AND DOES NOT FULLY COMPLY WITH REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES."
Models : Isuzu Rodeo
Body, Interior & Misc., November 18, 1997
Summary:VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLES EQUIPPED WITH A DRIVER'S SIDE OPTIONAL EQUIPMENT RUBBER FLOOR MAT. REPEATED MOVEMENT OF THE DRIVER'S FEET AND ACTUATION OF THE ACCELERATOR PEDAL CAN RESULT IN A SHIFTING OF THE MAT'S POSITION. THIS SHIFTING CAN CAUSE AN INTERFERENCE WITH THE ACCELERATOR PEDAL.
Models : Isuzu Hombre
Electrical & Lights, November 14, 1997
Summary:VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS AND MULTI-PURPOSE VEHICLES. AN ENGINE ELECTRICAL WIRING-HARNESS CLIP CAN MELT AND DRIP ONTO THE EXHAUST MANIFOLD.