» » »

Dodge Q&A

Ask Your Question

2006 Dodge Magnum Question: interior lights went out and will not come on

 

Question

Robert Pine SR, 5.7L V8 HEMI, Crystal River, FL, October 11, 2010, 07:41
 Rookie

interior lights went out and won't come back on . Fuses are good

2 Answers
Flag This
  • Medium-star Best Answer
    October 22, 2010, 15:39
     Master

    Have you checked the bulbs? That being said. Your Instrument Cluster controls the interior lamp functions via input from the switch. Here is an explanation of some of the functions of the Instrument Cluster (EMIC)

    The instrument cluster is an ElectroMechanical Instrument Cluster that is located in the instrument panel above the steering column opening, directly in front of the driver. Besides analog gauges and indicators, the EMIC module incorporates two blue-green digital Vacuum Fluorescent Display (VFD) units for displaying odometer/trip odometer information, engine hours, automatic transmission gear selector position (PRNDL), several warning or reminder indications and certain diagnostic information. The instrument cluster also includes the hardware and software necessary to serve as the electronic body control module and is sometimes referred to as the Cab Compartment Node or CCN. Besides typical instrument cluster gauge and indicator support, the electronic functions and features that the EMIC supports or controls include the following:

    Accessory Power Delay Relay Control -
    Audible Warnings -
    Automatic Headlamps Control - On models equipped with optional automatic headlamps
    Brake Lamp Control
    Brake Transmission Shift Interlock Control -
    Compass Mini Trip Computer Support -
    Enhanced Accident Response Support -
    Exterior Lamp Load Shedding -
    Exterior Lighting Control -
    Exterior Lighting Fail-safe -
    Heated Seat Control -
    Horn Control -
    Interior Lamp Load Shedding -
    Interior Lighting Control -
    Power Locks -
    Remote Keyless Entry -
    Remote Radio Switch Interface -
    Turn Signal & Hazard Warning Lamp Control -
    Vacuum Fluorescent Display Synchronization -
    Vehicle Theft Security System Control -
    Wiper/Washer System Control -

    Reply
    Flag This
  • Answer #2

    Visitor, December 25, 2010, 16:53

    bulbs rgood was puting in a radio in and the lights wnt out

    Flag This
  • Reply

    Visitor, May 17, 2011, 21:08

    I had that exact same problem today did you ever figure out what it was? if so please share

    Reply
    Flag This