Infiniti M45 Recall 13V430000
Engine Stall Concern
The engine could stall unexpectedly at idle or when coming to a stop due to a low idle condition.
Nissan will notify owners beginning early November 2013. If you don't receive notification and you feel you should, please contact your dealer for further instruction. They may ask for your vehicle identification number (VIN), so please have it handy when you call.
On nearly all cars on the road today the engine idle speed is computer controlled. These vehicles are being recalled because the idle may be to low as a result of a sensor failure causing the computer to operate in the fail-safe (limp home) mode. In the limp home mode, the computer will not properly adjust for variations in the engine idle speed. As a result the engine can stall unexpectedly at idle or when coming to a stop. The sensor causing this concern is the accelerator pedal position sensor. Dealers will replace the accelerator pedal assembly and reprogram the engine control module to correct this concern.
September 26, 2013
VEHICLE SPEED CONTROL
Nissan North America, Inc. (Nissan) is recalling certain model year 2006-2010 Infiniti M35 and M45 vehicles manufactured April 4, 2004, through October 5, 2010. Over time, the accelerator pedal sensor signal may deteriorate resulting in the output of an incorrect signal causing the engine to go into fail-safe (limp home) mode.
In this fail-safe mode, throttle valve deposits may cause the engine to stall when the vehicle is coming to a stop or at idle, increasing the risk of a crash.
Nissan will notify owners, and dealers will replace the accelerator pedal assembly and reprogram the engine control module, free of charge. The recall is expected to begin in early November 2013. Owners may contact Nissan at 1-800-647-7261.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall data provided by the National Highway Traffic Safety Administration