the lite on the transfer case selector switch also on the dash no longer comes on. it does flash when turning the key to start the truck, but it remains in two wheel drive. Ive changed the selector switch, encoder and front actuator still no change. inspected wiring harnesses for damage fuses and relays. don't have a scanner to pull codes. can changing the fluids make a diff.
Chevrolet Q&AAsk Your Question
2001 Chevrolet Silverado 1500 Question: I received a service 4wheel drive message on the dash
Answer #1pushrod October 09, 2012, 03:06Master
SCAN FOR CODES OR HAVE IT SCANNED FOR CODES!
ReplyVisitor, October 14, 2012, 10:34Rookie
We live in a small village in Bristal Bay Alaska, there are no service centers here, any other Ideas, I found the Transfer case control modual and a service manual with wire diagram. I do plan to procure a scanner as I can afford one. Any other Ideas thank you
Replypushrod, October 14, 2012, 16:11Master
CAN YOU HEAR MOTOR ON TRANSFER CASE DOING ANYTHING WHEN SLECTOR SWITCH CHANGED? (NEED 2 PEOPLE)
IF NOT LIGHTLY TAP ON MOTOR WITH "SMALL" HAMMER TO SEE IF IT IS JUST STUCK. HOWEVER SCANNER WILL BE
A BUNCH OF HELP! I THINK IT ALSO HAS A FOUR WHEEL ACTUATOR SWITCH ON TRANSFER CASE.
GET A SCANNER.
ReplyVisitor, October 14, 2012, 19:21Rookie
thanks for the reply, no tried both encoders with someone pressing the buttons, still nothing.but as i stated before, on the selector switch NO lites come on when the key is turned on. they only flash when the key is turned on once the truck is started the lights still do'nt come on. but I am wondering if I am to have voltage with the key on @ the BRN wire from fuse block to Aux. battery relay to front actuator. I want to track down voltage and grounds to see if there's something there
Answer #2Greg's Orange Auto (13188 Answers) , Orange, CA - (714) 361-9386globalhelper October 09, 2012, 07:05Master
scan codes and post so we can adv
Answer #3Thiel66 August 05, 2014, 10:33Rookie
Any update on this issue? Mine is having the same problem.