Q&A

 Master

Remove front fender apron seal RH. Remove the 2 bolts.
Disconnect return hose.
CAUTION: Take care not to spill fluid on the drive belt.
Disconnect pressure feed tube.
Remove the 2 clamp plate set nuts.
Remove the bolt.
Remove the 2 clamp plates and 2 holders from the tube.
Remove drive belt. Loosen the 2 (A and B) bolts.
Remove PS vane pump assembly with pressure feed tube.
Disconnect the connector from the oil pressure switch.
Loosen bolt A sufficiently so that pump assembly can be removed.
CAUTION: Bolt A cannot be removed.
Remove pressure feed tube.
Remove the oil pressure switch from the union bolt.
Remove the union bolt and gasket.

Roy