How do I replace the driverside headlight on 1990 Dodge Spirit

Not sure how to get into it to get the old bulb out and replace it

by in Altamonte Springs, FL on July 31, 2010
1 answer
ANSWER by on June 29, 2011
UNHOOK THE ELECTRICAL CONNECTOR FROM THE BULB,TURN THE BLACK OR GREY BULB LOCK RING COUNTERCLOCKWISE AND PULL THE BULB OUT OF THE LAMP ASSEMBLY.BE SURE NOT TO TOUCH THE NEW BULB AS GREASE FORM YOUR FINGERS WILL SHORTEN THE BULB LIFE.THEN REINSERT THE BULB MAKE SURE IT'S FULLY SEATED,INSTALL THE LOCK RING AND THE ELECTIRICAL CONNECTOR AND YOU'RE DONE.THE BULB YOU SHOULD BE USING IS A 9004.