My check engine keeps coming on and it was missing at idle. The check engine diagnostic was misfire on cylinder two. i took it to a dealer they told me i had the wrong spark plugs. (I got them from Autozone). They supposedly cleaned the injectors. I seemed to be better after the repairs but then it started over again. i ran injector cleaner and used high octane gasoline. I still have the same problem. it misses on idle and cut out going up a hill. Yes the check engine light still comes on and off. I was told to clean the throttle body next. Do you have a page that shows me how to do this. I do not trust the so called experts at the dealership.
how do i clean the throttle body on my 2006 GMC Canyon 5 cylinder on 2006 GMC Canyon
by marty1956 in Tecumseh, OK on January 16, 2012
ANSWER by canyonRus , March 11, 2013
I have the exact same problem with the same truck. Has anybody found a cause?
ANSWER by SHAWN03 , February 11, 2012
FROM MY EXSPEREANCE CLEANING IT WILL NOT HELP BUT HOWEVER REPLACING WITHOUT REPLACING THE OTHER HALF WHICH IS THE ACCELERATER GAS PEDAL WILL ONLY TEMP. FIX UNTIL BOTH ITEMS ARE REPLACED AT THE SAME TIME THE MISFIRE CODE WILL KEEP COMING BACK AND THE ENGINE WILL RUN A DAY OR TWO FINE ONCE CODE IS REMOVE BUT ALWAYS COMES BACK