Locate the rear motor mount supports on the bottom side of the engine. Remove the bolts using a ratchet and socket.
2 Place the vehicle in neutral and confirm the parking brake is engaged.
3 Install the J 41131 rotation tool onto the engine using a ratchet and socket. The J 41131 rotation tool is a special tool designed to attach to the engine to allow it to be rotated. These are available at your local dealer. Attach a ratchet strap to the J 41131 rotation tool.
4 Or use something similar to rotate the engine towards the front of the vehicle. I have used a floor jack and also a two by four in the past. Just be careful where you place them.