Honda Recalls

RepairPal Expert Overview:

The ball joints in the front suspension may prematurely wear out. The ball joints could break in severe circumstances, which may cause an accident. Dealers will replace the front suspension lower ball joints. This recall is expected to begin by May 17, 1999.

Summary:
VEHICLE DESCRIPTION: ELECTRIC VEHICLES. THE PROGRAM LOGIC FOR THE MOTOR ELECTRONIC CONTROL UNIT (ECU) CAN MISTAKENLY DETECT A FAILURE OF AN ELECTRICAL CURRENT SENSOR AT SPEEDS ABOVE 50 MPH. IF THIS OCCURS, THE ECU QUICKLY REDUCES VEHICLE SPEED IN ORDER TO MAINTAIN PROPER FEEDBACK CONTROL.
RepairPal Expert Overview:

Honda is recalling sedans, coupes, and wagon passenger vehicles (except DX models and models with V6 engines) because the factory installed AC wire harness was improperly routed, which can cause a short circuit. The may cause the under-hood wiring to overheat and smoke, possibly causing a fire in the engine compartment. It can also lead to a blown fuse or dead battery. Dealers will inspect and repair the harness.

Summary:
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. A GROUND CONNECTION TERMINAL WAS NOT PROPERLY CRIMPED IN THE SUPPLIER'S ENGINE WIRING HARNESS MANUFACTURING LINE. THIS IMPROPER CRIMPING PROCESS CAN LEAVE AN IMPRESSION ON THE TERMINAL THAT WILL EVENTUALLY CAUSE A STRESS FRACTURE. S
Summary:
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. A GROUND CONNECTION TERMINAL WAS NOT PROPERLY CRIMPED IN THE SUPPLIER'S ENGINE WIRING HARNESS MANUFACTURING LINE. THIS IMPROPER CRIMPING PROCESS CAN LEAVE AN IMPRESSION ON THE TERMINAL THAT WILL EVENTUALLY CAUSE A STRESS FRACTURE. S
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES (HONDA ACCORD SEDANS MANUFACTURED FROM SEPTEMBER 18, 1997 TO JANUARY 10, 1998; COUPES MANUFACTURED DECEMBER 11, DECEMBER 15, 1997, AND JANUARY 5, 1998; ACURA 2.3CL MANUFACTURED OCTOBER 22, 1997 THROUGH JANUARY 7, 1998). DURING MANUFACTURING, THE CASTING DIE CAUSED AN IRREGULARITY IN THE RIGHT-SIDE TRANSMISSION COVER. THIS IRREGULARITY CAN LIMIT THE MOVEMENT OF THE PARKING PAWL ACTUATION LEVEL AND PREVENT ADEQUATE ENGAGEMENT OF THE PARKING GEAR PAWL. THIS DOES NOT COMPLY WITH FMVS NO. 114, "THEFT PROTECTION."
RepairPal Expert Overview:

Honda is recalling certain passenger vehicles due to improper welding on the front passenger seat belt retractor mounting bracket. The bracket may separate from the vehicle body during a crash. Dealers will inspect and repair the brackets.

RepairPal Expert Overview:

Honda recalled certain 1997-1995 Civics due to improper assembly of the cloth flaps that cover the folded air bag. The cloth flaps were found to be tucked in too far, which could prevent proper deployment of the air bag. This could result in an injury in the event of a collision. Dealers will repair the front passenger air bag module.

RepairPal Expert Overview:

Honda is recalling 1995 Accord models because the SRS electronic control module may cause the air bag to deploy unexpectedly. This can result in abrasions or serious injury to occupant. Dealers will replace the SRS ECU in the air bag system.

Summary:
THE LATCH PLATE USED IN THE SEAT BELT BUCKLE WAS NOT MANUFACTURED ACCORDING TO DESIGN DIMENSIONS. IF THE SEAT BELT TONGUE IS INSERTED SLOWLY AT AN ANGLE INTO THE BUCKLE, THERE IS A POSSIBILITY OF PARTIAL ENGAGEMENT.