1998 Honda Prelude Problems
RepairPal has identified the most common problems with the 1998 Honda Prelude as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
The 1990-2001 Honda Prelude engine oil pressure sensor is known to leak from normal operation.
More information about the oil pressure sensor here.
To correct the leak, the sensor must be inspected, properly sealed and installed, or replaced with new.
A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.
The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.
On some models the manual transmission fifth gear can grind on upshift due to a misaligned fifth shift fork. The transmission will have to be removed and disassembled and the fifth gear, the fifth sleeve set and the fifth gear shift fork will have to be replaced to repair this issue.
On certain models one or both doors can be difficult to open from the inside due to an inner handle rod being too long. Replacing the rod with an updated rod from Honda will repair this problem.
A clunk noise can develop from the rear due to upper damper spacers compressing over time. Installing new damper collars is required to stop the noise.