» » »

Car Recalls

Recalls are issued for cars with safety-related defects or problems

2002 Honda CR-V recalls

 

Body, Interior & Misc., November 4, 2014

RepairPal Expert Overview:

This limited regional recall is for vehicles currently registered or first sold in southern Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. Upon deployment the passenger airbag inflator could rupture, increasing the risk of personal injury. Dealers will replace the passenger side air bag inflator to correct this concern.

Learn more »

Body, Interior & Misc., June 20, 2014

RepairPal Expert Overview:

This limited regional recall is for vehicles currently registered or first sold in Florida, Puerto Rico, Hawaii and the U.S. Virgin Islands, and equipped with Takata-brand air bag inflators. Upon deployment the driver and/or passenger airbag inflator could rupture, increasing the risk of personal injury. Honda dealers will replace the affected airbag inflator modules to correct this concern.

Learn more »

Body, Interior & Misc., April 11, 2013

RepairPal Expert Overview:

Airbags use a chemical reaction contained in an inflator module to create the pressure necessary to inflate the bags when deployment is required. These vehicles are being recalled because the front passenger airbag inflator may produce excessive internal pressure when deployed. As a result, the inflator module could rupture causing metal fragments to strike vehicle occupants. Dealers will inspect and replace any defective passenger front airbag inflator module found.

 

Learn more »

Body, Interior & Misc., October 5, 2012

RepairPal Expert Overview:

The driver-side power window switch may fail or melt. If the switch fails, it could overheat, smoke, and cause a fire. A switch failure and a fire could occur even if the vehicle is not in use. As a precaution, owners are advised to park outside until the recall repair has been performed. Dealers will inspect and repair the driver's window switch as necessary. The Honda recall number is S61.

Learn more »

Electrical & Lights, March 29, 2012

RepairPal Expert Overview:

The electrical terminal for the low beam headlights may wear in the electrical connecter at the combination headlight switch. This can cause increased electrical resistance and melting of the terminal ends within the wiring harness connector. Failure of the electrical connector can cause the low beam headlights to become inoperative, reducing driver visibility and increasing the risk of a crash. Dealers will repair the damaged terminal harness or replace the combination lighting switch as necessary to correct this concern. The Honda recall number is S34.

Learn more »

Body, Interior & Misc., April 27, 2011

RepairPal Expert Overview:

Honda is recalling 2,430 vehicles because a driver's airbag inflator, installed as a replacement part, may be defective. In the event of deployment, these inflators could produce excess internal pressure and rupture, increasing the risk of injury to vehicle occupants. Dealers will inspect and replace the driver's airbag inflator as necessary. The recall is expected to begin by June 27, 2011. 

Learn more »

Body, Interior & Misc., February 26, 2010

RepairPal Expert Overview:

Honda has recalled 2001-2003 Civic, 2002-2003 Civic SI, 2001-2002 Accord, 2002 CR-V, 2002 Odyssey, 2003 Pilot, 2002-2003 Acura TL, and 2003 Acura CL vehicles because the driver's side air bag inflator may produce excessive internal pressure. This could cause the inflator to rupture if the air bag deploys. Metal fragments may pass through the air bag material and cause injury to vehicle occupants. Dealers will replace the driver's side air bag inflator.

Learn more »

Body, Interior & Misc., June 16, 2004

RepairPal Expert Overview:

The wire harness of the driver's front air bag was incorrectly wired. In the event of an accident, the air bag might inflate incorrectly, which may increase the risk of injury to the driver. Dealers will repair the wiring.

Learn more »

Electrical & Lights, November 3, 2003

RepairPal Expert Overview:

Metal particles in the key cylinder body could interfere with the interlock lever operation, which makes it possible to remove the key from the ignition without shifting into "Park." This may cause the vehicle to roll away. Dealers will inspect and test ignition switches for contamination interference and repair them if necessary.

Learn more »

Drive Train, August 19, 2003

RepairPal Expert Overview:

Excessive corrosion of the shift cable linkage may prevent the driver from shifting into "Park." This may cause the vehicle to roll away. Dealers will inspect and replace the shift cable if corrosion is present and install a new corrosion-resistant control pin.

Learn more »
Ask a Question