My door jam switch (DS-860) has failed on my car. This past weekend was the fourth such time for the driver's side. It has failed three times on the passenger side. The Honda dealer wanted $350 per replacement. A mechanic has charged up to $200 per replacement. They have told me that the part is jammed (no pun intended) into the panel and is doomed to fail. I've owned my 2001 since 2003, have put just under 100K miles on it. I am tired of rep...
Problems for specific Honda CR-V years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2001 Honda CR-V problems
A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.
The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.
Worn door lock tumblers can cause the door lock to be sticky or not work at all. The lock has to be removed and the tumblers need to be replaced for this issue.
The engine valves can prematurely fail. The cylinder head will need to be replaced due to wear in the area where the valves seal. Intake or exhaust valve failure may illuminate the Check Engine Light. The car may have poor engine performance and fail emission tests.
A groaning noise from the rear differential heard while going through turns can be caused by differential fluid break down. Servicing the rear differential will generally correct this concern.
The rear trailing arm bushings tend to crack and break requiring replacement of the bushings.