2012 Honda Accord Problem Reports

Newest 2012 Honda Accord Problem Reports

Report A Problem

The PCM can misinterpret misfire data and set a false Check Engine (MIL) light requiring a PCM update to repair.

The AC condenser failed due to contact with road debris and a lack of protection for the condenser.

When reaching approx. 30 mph a "roaring" sound started coming from the rear of the car. Turned out to be a bad right rear hub/bearing unit - which was covered under 60k mile warranty. There is a TSB 10-028 that has been issued.

The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.

Ignition switch failure may cause the car to stall or fail to start. Honda issued a recall to replace the ignition switch. For more information on this recall please click here»

Power door locks can activate intermittently due to a faulty door lock actuator in the driver's door.

Leaking gaskets around the tail lights can allow water entry into the tail light assembly. New gaskets should fix this concern.

Poor radio reception can be caused by corrosion in the antenna mast. Replacement of the antenna and other corroded parts will be needed.