Problems for specific Honda Accord years:
Problem Reports
Problem with your car? See what our experts say or submit your own.
2006 Honda Accord Problems
Vibration When Braking Due to Rotor Problem
The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.
ABS Modulator May Leak Air and Cause Low Brake Pedal
The ABS modulator (hydraulic unit) can leak air into the brake system and cause a low brake pedal. A new ABS modulator will be needed if it is diagnosed to be the source of the leak.
Chirping Noise From Timing Belt Due to Misaligned Idler Pulley
A chirping noise coming from the timing belt area can be caused by a misaligned, or tilted idler pulley.
Plugged Moon Roof Drains May Cause Water Leak
Plugged moon roof drains can cause a water leak inside the car. The water will usually leak onto the driver's or passenger's head when the car turns a corner.
Check Engine Light Due to Air Fuel Sensor Fault
The air/fuel sensor, located in the exhaust system, may be damaged by moisture in the exhaust resulting in illumination of the Check Engine Light. Replacing the damaged air/fuel sensor and updating the powertrain control module (PCM) software should correct this concern.
Air Conditioning Blowing Warm Air
The AC condenser failed due to contact with road debris and a lack of protection for the condenser.
Front Compliance Bushings May Crack
Front compliance (lower control arm ) bushings tend to crack and break requiring replacement.
Problems Shifting Into 3rd Gear
Some models have shift quality problems when shifting into third gear. A new "third gear set" from Honda will address this issue.
Overhead sunglass holder will not open
Overhead sunglass holder will not open/glasses stuck inside.can't shake it loose to open.
PCM may misinterpret data from coolant temperature sensor
The Powertrain Control Module (PCM) can misinterpret data from the coolant temperature sensor and set a false Check Engine (MIL) light. The PCM will need a software update for this issue.