Problems for specific Honda Accord years:
Problem Reports
Problem with your car? See what our experts say or submit your own.
2002 Honda Accord Problems
Brake Light On Due to Faulty Master Cylinder Resevoir Filter
A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.
Vibration When Braking Due to Rotor Problem
The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.
Rough Idle/Harsh Shifting Due to Broken Front Engine Mount
A rough idle and harsh transmission shift can be caused by a broken front engine mount. Replacing the broken mount will address these issues.
Transmission Failure Common
Automatic transmission failures are common, Automatic transmission failure on these vehicles will generally require overhaul or replacement of the transmission. In the event of a failure, it may be worthwhile to check with Honda to see if they may offer assistance for this repair. As these vehicles age, Honda has become less likely to help out with these transmission related repairs.
Knocking Noise From Rear of Vehicle
One or both of the rear sway bar end links may break resulting in a knocking noise from the rear of the vehicle.
"No Start" Due to Ignition Switch Failure
Ignition switch failure may cause the car to stall or fail to start. Honda issued a recall to replace the ignition switch. For more information on this recall please click here»
Engine Oil Leaks Due to Porous Engine Block Casting
The engine may develop and oil leak due to a porous engine block casting. The repair procedure is dependent on where the leak is located. Honda has released a service bulletin covering model years 1998-2003. Honda may offer assistance with repairs, determined on a case by case basis.
Plugged Moon Roof Drains May Cause Water Leak
Plugged moon roof drains can cause a water leak inside the car. The water will usually leak onto the driver's or passenger's head when the car turns a corner.
The Throttle Can Stick or Pop After Vehcile Sits for a While
The throttle body can accumulate carbon deposits causing the throttle to stick or pop when first accelerating after the vehicle sits for a while. Performing a throttle body service will generally correct this problem.
Driver's Door May not Open
The driver's door latch assembly can break internally, which causes the door to stay closed. The interior and exterior door handles do not work to open the door. Our technicians note that the door panel must be removed while the door is closed (likely damage will occur) and the latch assembly must be drilled in a specific spot for the door to open.
Power Door Locks to Activate Intermittently
Power door locks can activate intermittently due to a faulty door lock actuator in the driver's door.
Check Engine Light on Due to Clogged EGR Ports
A Check Engine light can come on if the EGR ports have clogged.
Alternator Bearing May Fail
Delphi style alternators on some of the engines have a history of alternator bearing failure. Bearing failure will cause a whining noise coming from the engine compartment.
PCM can misinterpret air fuel ratio requiring replacement of the PCM
A Check Engine Light can come on because some models may misinterpret the ratio of air and fuel being burned for combustion. The powertrain control module (PCM) will need to be replaced to fix the problem.
EVAP soleniod failure due to road salt
-
Verified
Quality Work -
Guaranteed
Fair Prices -
Happy
Customers