Problems for specific Honda Accord years:
Problem Reports
Problem with your car? See what our experts say or submit your own.
1998 Honda Accord Problems
Oil pump failure
Routine maintenance performed as recommended by manufacturer. Input shaft to oil pump failed. Replaced engine at the dealership for $4,500.00. Replacement short block engine = $750.00 ...the rest was installation.
Check Engine Light Due to Clogged EGR Ports/Deterioration in Catalytic Converter
A Check Engine Light may illuminate if the EGR ports have clogged or if the catalyst inside the catalytic converter has deteriorated.
Brake Light On Due to Faulty Master Cylinder Resevoir Filter
A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.
Vibration When Braking Due to Rotor Problem
The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.
Misaligned Shift Fork May Cause Transmission to Grind on Upshift
Some models with the manual transmission can grind while shifting up into fifth gear due to the misalignment of the fifth gear shift fork. The transmission will need to be removed, and fifth gear, the synchronizer sleeve set, and the fifth gear shift fork will need to be replaced.
Rough Idle/Harsh Shifting Due to Broken Front Engine Mount
A rough idle and harsh transmission shift can be caused by a broken front engine mount. Replacing the broken mount will address these issues.
Transmission Failure Common
Automatic transmission failures are common, Automatic transmission failure on these vehicles will generally require overhaul or replacement of the transmission. In the event of a failure, it may be worthwhile to check with Honda to see if they may offer assistance for this repair. As these vehicles age, Honda has become less likely to help out with these transmission related repairs.
"No Start" Due to Ignition Switch Failure
Ignition switch failure may cause the car to stall or fail to start. Honda issued a recall to replace the ignition switch. For more information on this recall please click here»
Engine Oil Leaks Due to Porous Engine Block Casting
The engine may develop and oil leak due to a porous engine block casting. The repair procedure is dependent on where the leak is located. Honda has released a service bulletin covering model years 1998-2003. Honda may offer assistance with repairs, determined on a case by case basis.
The Brake Pedal May Feel Hard After Vehicle Has Set For Extended Time
If the brake pedal feels hard the first time it is pressed in the morning, it could be due to a problem with the vacuum supply hose for the brake booster. A revised brake booster hose is available to address this concern.
Plugged Moon Roof Drains May Cause Water Leak
Plugged moon roof drains can cause a water leak inside the car. The water will usually leak onto the driver's or passenger's head when the car turns a corner.
The Throttle Can Stick or Pop After Vehcile Sits for a While
The throttle body can accumulate carbon deposits causing the throttle to stick or pop when first accelerating after the vehicle sits for a while. Performing a throttle body service will generally correct this problem.
Vibration, Roughness, and Rattle Due to Damaged Engine Mounts
Damaged engine mounts can lead to vibration and roughness felt in the steering wheel. A rattle in the dash and engine area may also be heard. Replacement of damaged mounts will commonly correct these issues.
Featured Shops and Dealerships
- (571) 252-8400 21715 Auto World Circle