1996 Honda Accord Questions

Unanswered 1996 Honda Accord Questions

Ask a Question
View:RecentAnsweredUnanswered
I just got a jump for my 96 Honda Accord after work that I left on all day and after my starting the car back up my running lights won't go out.
Hi Guys, Originally, the 1996 Accord LX would start without any issues. Then after traveling about a mile, numerous hesitations arose for the next few miles. It felt like it was starving for fuel. If I pumped the gas...
The ignition must be in the on position for about 10 or 15 minutes before the engine will start. The coil doesn't seem to have good spark till then is it the ignition or the coil?
I changed the water pump and it drove good for two days. Then drove 2 miles, got got, the coolant blew somewhere under the distributor. Notice oil, opened distributor cap and oil coming from inside and took the plug w...
at the stoplight, I had it in drive and it did not want to take off, now I'm not for sure if it is the transmission or a sensor.
On putting key in ignition, and starting the car, I note that it will start only after I get an green light indication on "D" gear on the dashboard's display panel. Sometimes, it takes 5 to 10 minutes after putting...
recently I have a problems with engine vibrates. I sent to workshop for repair. Found engine oil already flow into the sparkplug compartment. Workshop told me the engine need to be top overhaul, change piston ring, ga...
The vehicle has not ran hot. it has 280,000 miles on it but has been taken care of. Could it possible be the valve stem seals allowing a little oil to seap by? It does not do it everytime i crank the car. the smoke do...
dignostic code p1259, check engine light came on 3 days ago. when i go up to about 4000 rpm in first, then shift to second car seemed to lose power.
I'm having trouble finding a replacement for my car year and model.
The tumbler is worn down...It appears to bwe stripped. It is a 2nd owned car, so I'm unsure if it was something lurking underneath. In any case, if there is a way to get it started Hot wire) it, so I get it to a sta...