1990 Honda Accord Questions

Answered 1990 Honda Accord Questions

Ask a Question
View:RecentAnsweredUnanswered
I was driving my car all day took it home to replace the distributor because it had been gettin oil in the cap causing to sputter, not thinking to jus change the Oring. Took the old distributor off replaced it with th...
...problems and ultimately failed. It began slipping when shifting from 1st to 2nd gear (eased off the throttle at shift point to capture gear). Performance continued to degrade, soon slipping also occurred shifting ...
It also gets stuck in park but you told me that either adjust or replacing the brake switch will fix that but does that have anything to do with the gears not shifting?
After leaving my parking lights on and totally draining my good battery, I jumped my 1985 Honda Accord SEi 1.8L (F/I) ES3 A/T Sedan. After hooking up the cables to both cars, I left the Mercedes running for about 20-...
Gage isn't reading that temp is hot but when we got to our destination after driving only about 15 miles - saw steam coming from under hood and heard fluid boiling. Checked and noticed the hose connecting to heater co...
It happens all the time. No CEL or any codes show up.
car turn off on turns/ someone said change oil/what do you guys think is wrong, i'm learning how to work on this car myself, so help; an thank you all!!!
The S light comes on, then it stalls. It starts up again in a short time. It will run rough for a bit then runs for awhile. Can someone help me
my cars been overheating on short trips especially when idling.once I start driving the temperature goes down but as soon as I hit another light it rises quickly. So far I've tested both fans directly to battery and t...
I had a week or two of minor shudders then it grinds when I put it in gear...there is no noise in neutral with the clutch pressed in or out...but when I start to nudge it into gear hear a whining noise...I can get it...
This started slowly and is getting worse,I am a mechanic and took very good care of it I bought it new 24 years ago. I am no sure where to start,head gasket or somewher else.THANKS WALT