195
questions

It has done this for 'bout 4 days when I finally pulled the filter can and took a look for vac leaks, carb probs, etc...
My choke was propped open by someone, I knew this. My father removed the wire propping it and we put some se@-fo@m in the gastank, then spray carb with cleanr/lube stuff. I have only ran it 'bout 10-15 mins since. I will runnit today for awhile.

I CAN SPIN TIRES FREELY WITH HAND BUT IF I PUT THE CAR DOWN OR I PUT ONE SIDE OF THE CAR DOWN I CAN SPIN THE WHEEL ABOUT 1 1/2 TIMES THEN IT BECOMES HARD TO SPIN.ALL OF THIS AND THE TRANSMISSION WILL BE IN NEUTRAL WITH NO BRAKES ON,WILL THE BRAKE LINE STILL BE COLLAPSING OR THIS IS SOMETHING ELSE

I had the valve cover gasket replaced due to an oil leak but I'm still getting white smoke coming out of my muffler. I was told that the white smoke would continue to come out of my muffler for a while due to the oil that leaked out. Is that true or could it be another problem?

ok, I own a 1990 honda accord DX with only 147000 miles on it. just recently my "S" light starts blinking. according to my research this means an electrical problem, but I do not know where start. it always shifts from 1st into 3rd. never 2nd or 4th. my TCU has a red LED which blinks 7 times. I dont know what that means in error codes so if anyone know TCU codes please let me know :)

on a 1990 honda accord ex

My bottom pully is keeps getting slack so i went and bought an hamallic balance, so i had the one on my car taken off which didnt have any teeth,So the new hamallic balance which had teeth so someone said i need a crankshaft because my old hamillic balance was smooth. My question does the crankshaft suppose to be smooth or have teeth? (I hope i explain it well)

I am wondering if this module can be disconnected and the car shifted manually?

I just recently changed my trans fluid and for a while everything was fine. After a couple weeks it just started shifting wierd, changing gears on its own when it doesnt need to. Some time while in drive it acts like its in 4th. I have no idea what happened.

THE INTAKE IT WILL FIRE

everytime i replace fuses for rear lghts fuse blows

front and rear engine mounts replace but still having this problem when i shift it engine jumps don't know what else we can do to this! oil leaking now from transmission, oil pan & from engine.

please help..

thank you

The windshield washer is not working on a 1988 honda accord and I need to know the location and the fuse is good!

I installed a new one and it die too. It started by the rpm and speed gauges not working and the car loosing power

Car has 140,000 miles with tuneup within last 10,000 miles. Thank You for your assistance.

Accord, Trailing link to back hub,When the spring compresses,bushing is the hinge point (2per car) wish firmer than factory