on my 2000 Ford Taurus, the high beam light indicator is on when ignition is turned on, but no lights are on. also, the driver side window is down, wont roll up, the passenger side window and rear windows are up wont roll down. Is this a relay switch problem, or the master switch panel on the driver door bad?
high beam indicator on 2000 Ford Taurus
by woodie in Modesto, CA on February 04, 2009
ANSWER by Andy Y on February 04, 2009
Do the windows work when using the respective door window switches? If any one of the windows operates (up or down), the fuses, breakers and modules are not the cause. I would look at your interior fuse panel for any blown fuses and make sure the relays are good if none of the windows work from their door switch.
ANSWER by Deanjr on April 10, 2012
on your central junction box(fuse panel in car) lower connector. pins have backed out. re-install pins and verify fix. also radio was inop this was on 2003 taurus but should be same box
My running lights stay on continuously even after car is shut off. The high beam light shows in my dash unless I turn headlights on. I can't find any other light buttons in the car.
How do you replace the High beam indicator Bulb?