Heater Blows Cold Air on 2003 Mitsubishi Galant

Not leaking fluid into car interior but leaks antifreeze from radiator; blows cold air only; thermostat tests ok; air conditioner works good;what could my problem be?

by in Hillsboro, OR on November 09, 2010
2 answers
ANSWER by on November 09, 2010
flush heatercore take hoses off heater core get a hose put on water hose flush heater core one side at a time till water runs clear could be therostat
ANSWER by on November 09, 2010
If you have a manual heater, then check to see if the heater hoses are in their proper place, that the engine gets hot, like in the middle of the gauge and then check the heater control valve. It should be in line with one of the heater hoses going to your heater core. If you have Automatic Climate Control again, make sure that your heater hoses are in place, that your engine is getting hot, like in the middle of the gauge and then you will have to scan the heater control computer to see what is not working correctly. I do not mean a parts store quick scan, but a data stream reading with a real scanner. Hope that this helps!
Related Items:
Its been working fine, this evening my daughter ran an errand and couldn't get heat blowing, heater just blowing cold. The thermostat is fine, the motor heats up in a timely manner to proper operat...
my car is overheating and leaked coolant at first but now its not. it just starts to bubble at the top of the radiator kinda in the crack between the car and the coolant nozzle and my heater also i...
It does that everytime I cut on my heat it blows out cold air insted of heat.
The water shut motor may fail. This motor controls coolant flow to the heater core. Replacement...

Related Content