2003 Ford Explorer Q&A

2003 Ford Explorer Question: Heater blows but no heat just clicking.

My heater doesn't warm up but the blower works. There's is a clicking noise whenever I turn on the heater. What's the problem and how do I fix the problem? -
Answer 1
It sounds like your blend door motor gear is stripped. This is the door that directs the air over either your heater core or your A/C evaporator core to blend the air together for the desired temp. if you are sure that you hear a clicking when you turn the dail for heat, ryt turning it to a cold setting and then back to a hot setting. If you hear a clicking then I would have a good heater and A/C tech look at it. Some Ford blend door motors are very hard to replace if that is in fact the real problem. -
Related Items:
A failed heater blend door or actuator can cause the temperature control for the HVAC system to stop working. A clicking sound from the dash area would commonly indicate an actuator fault. If the ...
My truck's heat will not warm up. It will only blow out cold air. If I drive the truck for a while with the air off, when I turn it on, there will be a little bit of heat for less than a couple of ...