I have a 2004 Dodge Dakota truck that has no speed control for the heater fan. I checked the fuse and it seems to be fine. I just learned about the heater blower resistor. According to a few answers on this site, if the resistor is bad the highest speed should work. Mine does not. No speeds at all. Not even when I had the A/C on this summer. I need to get this fixed. Any answers?
heater blower motor on 2004 Dodge Dakota
by kenandmeg in Unionville, CT on October 15, 2009
1 answer 2 comments
ANSWER by Bret Bodas on October 15, 2009
I would check for power and ground signals to the blower motor. If they are OK, then the motor is bad, if you are not getting the proper signals, then the circuit will need to be diagnosed to determine what is wrong.
COMMENT by kenandmeg on October 16, 2009
How do I remove the dashboard to check this? Or do I check this at the fuse box?
COMMENT by Bret Bodas on October 16, 2009
You'll need to check this at the heater blower motor. If you don't know how to access the blower motor, you should get a repair manual, you can find one at alldatadiy.com for less than $25.00 and it's an online manual so you will have it in minutes. If your not experienced with electrical diagnosis, you may want to take this to a repair shop, you may save yourself a lot of time and money!
heater blower fan only works in high position, Could someone please tell me where it is located on the truck? Thank you for your help!
Sometimes I have to wiggle the wiring to get it started, Sometimes it does'nt work at all
My heater started to work only on high,it used to work fine.
Heater fan will not work in any position. The Resistor was replaced a year ago and was working fine, until now. The fuses appear to be good.
heater stopped blowing hard about aweek ago. no matter what setting the heater is on, the heat just slowly leeks out. any solutions?