Hard Top on 1992 Mercedes-Benz 300SL

Good, yesterday when I went to remove the hard top, I was completely disappointed when you press the button on the console, gave no sign ... the remedy was to take it manually and successfully, what was my astonishment is the soft top do not go out and shows no sign of life (do not know how to take this manually) any tips or suggestions? thanks

by in Hancock, ME on June 20, 2011
2 answers
ANSWER by on June 21, 2011
there is no "manual" way to remove the hard top or to operate the soft top. all of the operations are done by hydraulic cylinders and should never be forced or pushed. you could have a leaking cylinder or low fluid in the pump and this should be checked at a MB specialty repair shop ONLY. they will be able to diagnose the problem.
ANSWER by on June 21, 2011
Overbys Hello friend, I do not wrung out well, I know that this procedure of removing the hard top is tricky, but forgot to mention that when I press the button on the wind screen roll bar does not rise, shows no sign of life. By which I think is an electrical problem, please inform me where is located the fuses or grate for these switches. Note: where can I get / buy the key to take the soft top manually. thanks
Related Items:
MY HARD TOP IS LOCKED AT THE WINDSHIELD PLEASE HELP ME REMOVE IT. THE BACK COMES OUT OF THE LATCHES BUT TH...
As vehicles age, various problems may develop with the hard and soft tops. If problems are encountered, it would be recommended to have a technician familiar with these tops perform the diagnoses.
I remove hard top and soft top was operatin fine then I put hard top on and could not get it to lock on the back...
The hard top will not release at the windshield. Any ideas