The front seat mounted side air bag inflators may rupture and spread metallic debris through the passenger compartment, possibly causing occupant injury or death. Dealers will replace the side impact air bag modules free of charge to resolve the concern.
The ignition key cylinder may bind, resulting in the key sticking in the "start" position inadvertently. This can result in the key snapping back unexpectedly into the "accessory" position, and cause vehicle stalling and loss of safety features. Dealers will replace the ignition lock housing free of charge to resolve the concern.
The windshield wiper motor may overheat and stop working, and cause a fire hazard. Dealers will replace the wiper motor cover assembly free of charge to resolve the concern. Owners are advised to not use the windshield wipers until the cover has been replaced.
The driver's door power window switch module may get contaminated with liquids causing a fire hazard. Dealers will replace the driver's door switch module free of charge to resolve the concern.
The power liftgate may fall suddenly from the open position due to the failure of the struts that support it when open. Dealers will update the software for the liftgate actuator motor control unit to prevent rapid closing of the liftgate free of charge to resolve the problem.
In a crash that deploys the passenger front air bag, the inflator of the air bag can rupture, causing metal debris to strike vehicle occupants. Dealers will replace the front passenger air bag inflator free of charge to correct the concern.
The front brake calipers may have an issue from the manufacturing of the metal caliper body, resulting in brake fluid leakage. Dealers will inspect and replace the front brake calipers if necessary free of charge to resolve the concern.
The driver's front seat frame attachment hooks may not be secured to the vehicle body as required. Dealers will inspect the seats and correct their installation as necessary free of charge to resolve the concern.
The driver's frontal air bag inflator may separate from the air bag module upon deployment. This can cause metal fragments to spray and injure occupants in an accident. Dealers will inspect the driver air bag module inflator for proper alignment and replace affected air bags free of charge to resolve the concern.
The ignition switch actuator can bind causing the ignition switch to stick in the "start" position. If this were to occur the actuator can unexpectedly release, cause the ignition switch to snap back into the "Accessory" position. This would cause the engine to turn off with an associated loss of brake and steering power assist. If these conditions were to lead to a crash the airbags may not deploy as expected. Dealers will inspect and replace the ignition lock housing as necessary to correct this concern.