1991 GMC 1500 Pickup Questions
Answered 1991 GMC 1500 Pickup Questions
Ask a Question
One rear cylinder was leaking. replaced both rear ones. Bleed system.Great brakes, light still on.
No picture of the oil cap in books.
What could be the cause of the sound I hear from the back of my truck ? It happens at about 35 to 40 and it sounds as of a rubbing or slight grind and as I come to a stop u hear something like there is stuff sliding from back to front in my bed of truck ?
I have also noticed and am unsure of the rear axle if u step on the brake and hit yhe gas the pig will move up and down bit the axle sleeves stay with the spring mounts and shocks is this normal ?
at startup it idles with 30 psi and at operating temperature it lowers to about ten psi at idle. currently running 10w 40 Pennzoil.
I replaced the intake & exhaust gaskets, temp. Sensor, & sending unit. No change If anyone can give me some idea what it may be or what to check next I would greatly appreciate it.
fit????Why and what do I do now since it won't pass inspection because h20 is too high??
I have replaced fuel pump, fuel sending unit, rebuilt TBI, replaced injectors and new fuel filter. No check engine light.
and advance faster but not making the shift. is there any thing like timing or vacume advance to check out before looking at the torque converter. there is no leaking of transmission fluid any where.
but stays in the lower gear and reves rpm on the motor.Just moved from the desert in scottsdale az. Any effect from timimg. I am thinking torque converter any suggestions. There ia no leaking of fluid in the transmition
It jumps around
do i need to add gasket sealer on heads and intake manifold
stalls after few miles of driving then will start up .seems to have back pressure.
This is a first time occurance. No other problems exist that I am aware of.
new fuel pump, new fuel filter, new rebuilt throttle body, new control module in the distributor, new fuel injuetors, new fuel relay....injections do not work......what am I I missing???
Fuel injections are getting fuel but, the truck still will not stay started. I also want to know where the ECM is located on the truck?