fuse block on 1992 Chevrolet G Series Van (G20)

My fuse block is getting wet i need to rewire it. I need all the info i can get on this. Please someone help.

by in Columbus, OH on January 08, 2009
1 answer 2 comments
ANSWER by on January 09, 2009
Is this the under hood fuse box - near the left side fender? If so you could be missing a water deflector to protect the fuse box. Depending on the amount of damage you may need to replace the fuse box. The connectors which plug into the fuse box may also be damaged. Any that show signs of corrosion will need to be replaced. This can be a very complicated repair. You may need some help with this one!
COMMENT by on January 09, 2009
thank you for your answer. This one is inside the van. We think we found the leak. Should i get a new fuse block to start out with?
COMMENT by on January 09, 2009
I think you should take a close look at your fuse box and the connectors plugged into it and the wiring around it. You will need to replace whatever looks to be damaged from the water. Look for corrosion in the connectors that plug into the fuse box. You may need to unbolt the fuse box as there may be some connections in the back.
Related Items:
I put $40.00 in the tank, gas gauge didn't move. for months it worked intermittently. now notta. I don't want to invest much $$ as it is 20 years old. could it be a ground issue?
can a hard hit on the master cilender make the abs light come on. and can i take the battery off to reset the control module so the abs light will go off . or do you thing there might be something ...
van was running fine..first time it stalled I checked and had spark but was getting no fuel...I replaced fuel filter and all was fine till next day....I started up okay but stalled after a few minu...

Related Content