fuel pump on 1991 Ford Explorer

Can you help me with a fuel pump diagnoses step by step , the trouble shooting procedures

by in Racine, WI on October 07, 2009
4 answers
ANSWER by on October 07, 2009
Check the fuel Pump Relay, if you have a Fuel Pressure Gauge you can use that, if you don't get some starter fluid and crank it up, disconnect the fuel line turn the switch on see if it pumps out Fuel. for diagrams or locations post a request on my website sinautoscan.com/forum al be happy to help if you need more help
ANSWER by on October 08, 2009
Check power and ground to the pump while cranking the engine. If you don't have both, then diagnose the fuel pump electrical circuit. If the signals are OK, then you will need to check the fuel pressure output from the pump. Let me know the results and if you need any other info.
ANSWER by on October 21, 2010
need to find out no power at the fuel relay switch
ANSWER by on November 28, 2010
turns over will not start
Related Items:
...T NOT RUN MORE THAN 3MIN,IF THAT INERTIA SWIYCH NOT THROWN INADEQUATE VOTAGE TO INERT. SWITCH. FUEL PUMP DOESNT RUN NFUEL PUMP WHEN BYPASSED,DIDN'T CHECK INERTIA SWITCH VOLAGE WHEN FUEL PUMP RELAY SWI...
I have a 1998 ford explorer that would start just fine and would run for about 10-15 minutes and then it would just stop running.. I removed the line coming from the gas tank right before the gas f...
I am NOT getting power to the fuel pump relay is good and they are nauseous which is not tripped
Checked the old pump still works, will run if I spray carb cleaner in air intake tube, can't hear pump run when key is turned on

Related Content