Alright, the front blower just stopped. The rear was blowing and still is but not cold air anymore. The air system is still cycleing. All the fuses are good, and there is voltage to it! I also removed the servo moter on the bottom of it and now it isn't turning! Noone has a book so, SOMEONE HELP PLEASE!!!!!!
front blower not working on 2004 Chrysler Pacifica
by robhart80 in Owensboro, KY on June 04, 2010
ANSWER by Visitor on January 06, 2011
Answer #1 Anonymous, January 06, 2011, 16:57 Replace the heat blower regulator located behind the glove box. To access open glove compartment squeeze on the side of the glove box it drops down you will see right in front of you 2 set of wires connected to the regulator. There are 2 bolts, that need to be unscrewed in order to pull out regulator, once taken out unplug the wires remembering the connections. Installation is the reverse of removal. I suggest you buy regulator at your local dealer for $70. Auto parts carry an aftermarket at a higher price but you can shop around. Overall rating: 0 (0 votes)
front blower isnt blowing used to stay on even when car was off. cant get no heat either. other night both dim headlights quit working. brights still work though
my front vents quit blowing all of a sudden but my middle and rear vents still blow on all settings my husband disconnected the auto temp fan control and the middle and rear vents still work but no...
My fan will not turn off. It blows on high when the car is on, and the controls do not work to adjust the fan up and down. Heat and air conditioning work, but the fan won't stop blowing on high.
Replaced the front blower motor and nothing. checked for power and no power to the motor when its on. Could it still be the resistor, or should I look some where else? Everything else works fine.