Ford Recalls

Summary:
THE OFFSET TOE ADJUSTING PIN CAN FRACTURE UNDER CONDITIONS SUCH AS TORSIONAL LOADS, FLEXING MOTION, IMPACT LOADS, AND OVERTORQUING.
Summary:
THE LOCK PLATE OF THE DRIVER SIDE INBOARD SEAT TRACK ADJUSTERS WERE MANUFACTURED WITH AN UNAUTHORIZED MODIFICATION TO THE FABRICATION PROCESS WHICH CAUSES THE SEAT NOT TO FULLY ENGAGE IN CERTAIN SEATING POSITIONS NEAR THE MID-POINT OF THE SEAT TRACK TRAVEL.
Summary:
THE MANUFACTURER'S CERTIFICATION LABEL AND/OR THE DRIVER AIR BAG ADVISORY LABEL MAY BE MISSING FROM THE VEHICLES, WHICH DOES NOT CONFORM TO THE REQUIREMENTS OF 49 CFR 567.
Summary:
THE STEEL FUEL RETURN TUBES THAT CONNECT THE FRAME FUEL RETURN LINES WITH THE ENGINE FUEL RAIL CAN CONTACT THE PINCH WELD FLANGE CONNECTING THE DASH PANEL TO THE FLOOR PAN. CONTINUED CONTACT LEADS TO ABRASION OF THE STEEL FUEL RETURN TUBE AND EVENTUALLY RESULTS IN A FUEL LEAK.
Summary:
THE U-CLIP STYLE NUTS THAT RETAIN THE FRONT BUMPERS TO THE FRONT BUMPER INNER ARMS CAN FRACTURE.
Summary:
AN UNUSED POWER SEAT HARNESS CONNECTOR IS POSITIONED ON THE RUBBER FLOOR MAT UNDER THE SEAT. IF THE VEHICLE IS OPERATED IN COLD WEATHER IN AREAS THAT HAVE LARGE AMOUNTS OF SALT USED FOR SNOW AND ICE CONTROL, A PUDDLE OF SALTWATER CAN ACCUMULATE ON THE RUBBER FLOOR MATS, REPEATEDLY WETTING THE CONNECTOR. THIS WILL RESULT IN CORROSION OF THE CONNECTOR, CAUSING A CURRENT TO FLOW BETWEEN THE TERMINALS WITHOUT TRIPPING THE CIRCUIT BREAKER.
Summary:
THESE VEHICLES DO NOT COMPLY WITH FMVSS 105, "HYDRAULIC BRAKE SYSTEMS." THE PARKING BRAKE APPLICATION FORCE FOR A FOOT OPERATED CONTROL SYSTEM SHOULD NOT EXCEED 125 POUNDS TO HOLD THE VEHICLE ON A 30% GRADE. INTERFERENCE BETWEEN THE PARKING BRAKE PEDAL AND A WIRE HARNESS MAY INCREASE THE NEEDED PEDAL FORCE TO GREATER THAN 125 POUNDS TO SET THE PARKING BRAKE TO HOLD THE VEHICLE ON THE 30% GRADE.
RepairPal Expert Overview:

Ford has recalled certain 1994 F150 and F250 trucks due to the installation of improper air bag modules. If equipped, the air bag warning light and air bag system will not function, causing a safety issue for occupants in a collision. Dealers will inspect the module on each affected vehicle and replace modules that are inappropriate for the vehicle.

Summary:
THE FUEL RAIL THAT PROVIDES THE FUEL SUPPLY TO THE FUEL INJECTORS HAS AN IMPROPERLY FORMED TUBE WHICH HAS THE POTENTIAL TO FRACTURE, CAUSING FUEL TO LEAK.
RepairPal Expert Overview:

Ford has recalled 1990-1993 F150, F250, and F350 trucks due to a faulty fuel pressure regulator and malfunctioning fuel pump check valves. Fuel may transfer from one tank to the second tank, causing a possible overflow condition and fire hazard. Dealers will replace the fuel pressure regulator and install redundant check valves.