In the affected vehicles, the halfshaft retention clip may not have been properly installed. As a result, without prior warning the halfshaft may move outward and disengage from the linkshaft while driving. This would result in loss of engine power to the drive wheels. Dealers will inspect the vehicles to make sure that the halfshaft is properly retained. If it is not, dealers will replace the linkshaft and also replace the halfshaft if it shows evidence of spline damage.
Ford Edge Recalls
Vehicles equipped with a 2.0L engine are being recalled because a crack may develop in the fuel line pulse damper housing. This could result in a fuel odor, weepage, or a continuous leak while the fuel system is pressurized. Any fuel leak increases the risk of a fire. Dealers will replace the affected fuel line with one that does not include a damper. This recall supersedes NHTSA recall #12V438000. All vehicles repaired under the previous recall need to have the current remedy applied.
Vehicles equipped with 2.0L engines are being recalled because the fuel line pulse damper metal housing may crack as a result of an improper manufacturing process. A cracked fuel line pulse damper housing may result in a combination of fuel odor, weepage, or a continuous leak while the fuel system is pressurized. A fuel leak in the presence of an ignition source may result in a fire. Dealers will perform the repairs necessary to correct this concern. The Ford recall number is 12S40.
The body control module (BCM) may develop an internal electrical short. This may cause the BCM to overheat, which can lead to a vehicle fire. Dealers will inspect the BCM and replace it as necessary. This recall is expected to begin on March 7, 2011. The Ford recall number is 10S14.
Ford is recalling certain 2011 F-150, F-250, F-350, F-450, F550, Edge, and Lincoln MKX vehicles due to a possible internal electrical short in the throttle body control module. If an electrical short develops, overheating of the control module may occur, which could result in a fire. Dealers will inspect and replace the throttle body control module as necessary.
During assembly the electronic module settings were not configured correctly. As a result, the locking function of the rear liftgate will not work as designed. The liftgate may not lock using the interior lock switches or the remote buttons. Dealers will upgrade the software in the affected control modules as necessary to correct this concern.