» » »

Problems for specific Ford Taurus years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Repairpal verified 1998 Ford Taurus problems

 

Verified for the Ford Taurus

The synchronizer shaft for the camshaft position sensor can cause a loud squeak or chirping noise due to failure of the upper bushing. The noise may be erratic and is usually present when the engine is warm.

4 Reports
Me Too

Verified for the Ford Taurus

The magnet for the camshaft position sensor may fall out of its mount and damage the synchronizers. This causes long crank times when starting the engine and may cause the Check Engine Light to illuminate. If this happens, both the magnets and the synchronizers need to be replaced.

41 Reports
Me Too

Verified for the Ford Taurus

If you experience difficulty starting the engine when cold, stalling at idle, or hesitations during acceleration, it may be the idle air bypass valve. This valve helps the vehicle idle steady when the accelerator pedal is not pressed.

6 Reports
Me Too

Verified for the Ford Taurus

The engine oil pan gasket can develop a leak. Leaking oil may accumulate on the exhaust system resulting in a burning smell. Replacing the gasket should correct this leak.

162 Reports
Me Too

Verified for the Ford Taurus

White smoke coming from the exhaust could indicate that a head gasket has blown or there is a cracked cylinder head. Our technicians tell us that removal and inspection of the cylinder heads will be required to confirm a crack is present.

8 Reports
Me Too
Ask a Question