» » »

Problems for specific Ford Ranger years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Newest reported 2002 Ford Ranger problems

 

Verified for the Ford Ranger

A rattling noise from the engine may indicate that the timing chain cassette is worn. Our technicians tell us that installing an updated cassette and timing chain tensioner should correct this concern.

8 Reports
Me Too

Verified for the Ford Ranger

The engine may misfire and/or buck while driving at freeway speeds with no fault code stored in the powertrain control module (PCM). This can be caused by an intermittent fault with the camshaft synchronizer assembly. This condition can be diagnosed by monitoring knock sensor data as per Ford service bulletin #05-22-12. Replacement of the synchronizer assembly will be required to correct this concern.

39 Reports
Me Too

Verified for the Ford Ranger

The synchronizer shaft for the camshaft position sensor can cause a loud squeak or chirping noise due to failure of the upper bushing. The noise may be erratic and is usually present when the engine is warm.

25 Reports
Me Too

Verified for the Ford Ranger

The magnet for the camshaft position sensor may fall out of its mount and damage the synchronizers. This causes long crank times when starting the engine and may cause the Check Engine Light to illuminate. If this happens, both the magnets and the synchronizers need to be replaced.

13 Reports
Me Too

Verified for the Ford Ranger

A buzzing type noise may be noted from upper engine area at about 1900 RPM, under light acceleration. Our technicians tell us this can be caused by loose ignition coil bracket bolts. Coil bracket bolts should be checked for the correct torque before further diagnoses is performed.

11 Reports
Me Too
Ask a Question