1995 Ford Probe Problems

RepairPal has identified the most common problems with the 1995 Ford Probe as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
Choose your vehicle
Known Problems

If the mass air flow sensor is not working properly, the Check Engine Light can come on, the engine can hesitate while accelerating, has reduced power, and a rough idle. Replacing the mass air flow sensor should fix this concern if the diagnostic trouble codes confirm the mass air flow sensor is the cause.

If the engine runs rough, stalls, hesitates on acceleration, is hard to start, or has generally poor performance, this can be caused by a cracked or broken air inlet tube. Loose clamps on the air tube can also cause this these problems. Tightening the air inlet tube, or replacing if broken, should correct the problem.

A defective oil pump can cause ticking noise from the engine, stalling, rough running, and reduced engine power. Replace the oil pump if this is found to be the cause.

If a buzzing noise is coming from the exhaust at different engine speeds and conditions, this is commonly caused by the heat shields on catalytic converters coming loose at points. The buzzing is the metal on metal contact. Installing a large worm clamp around the catalytic converter and heat shield assembly will prevent the noise and secure the shields.

Water corroding the head light actuator connector can cause the head lights to open and close on their own, or operate erratically. Replacing the head light actuator motor should fix this problem.