215
questions

I have a 1997 F150 4x4 that has developed a shimmy problem at 35mph & above. It has new ball joints & stablizer bars installed about 18 months ago. What is most likely cause?

I have a ground wire that burned into. Wire is connected to the fire wall,but I cannot find were it goes to. I have brought two batteries and two starters. Need to know were this ground wire goes.

When I turn the heater on regardless of how long I let the Truck warm-up it still blows cold air. How big of a repair job would this be?

Light stays on for about 2 mins and goes off when driving, and internal cab alarm stays on when driver side door is open with engine off.

estimate to replace transmission pan gasket and filter

where is the sending unit found at

what to do if it say system too lean (bank 1 )

This is the first time the problem has occured. I received one estimate that seeemed extremely high.

my 1997 f150 is somewhat hard to steer and is making noises. She has fluid. about how much to repair steering pump and or steering motor, all in.

IN ORDER TO EXTRACT TROUBLE CODES, IS THERE A SPECIFIC PROCEDURE TO FOLLOW?
OR JUST HOOK UP THE OBD 2 SCANNER

heater is on and starts blowing cold and temp gauge goes hot,turn off control to heat/air,temp goes back normal.can turn back on and works fine untill next time

Is there another place to mount the sending unit if I replace the OEM remote oil filter assy. This unit has the sending unit attached and I want to replace it with an aftermarket unit that doesn't have a place to mount the unit.

no fire or pulse

My 1997 F-150 271,500 mi.ment condition, makes a bump noise in the rear when turning right or left from level pavement onto a sudden hill at 5 mile an hour. Note: This winter I'm carrying 480 lbs. of sandbags. I never heard this sound last year. What should a technition be looking for when inspecting.

The gear shift lever has a lot of play. Do I need to replace the bushings? If so, how do I get to them?